In addition to our keyboards, we offer a selection
of useful accessories such as keyboard/monitor-amplifiers, adapters, converters, transformers... |
Keyboard-, mouse- and VGA monitor-amplifier (Verst.Tas/Mon/M) |
The Verst.Tas/Mon/M comprises 3 amplifiers and the power supply unit in one housing and thus allows the operation of keyboard, monitor and mouse up to 82 m away from the computer. For this reason, it is the ideal solution if your computer and its peripheral equipment cannot or shall not be placed in one and the same room.
Suited for all PC’s with the respective interfaces (not for DVD or similar devices). |
 Technical data
Terminal units:
- Keyboard 6-pin MiniDIN female connector
- VGA monitor HD-15-F female connector
- Mouse 6-pin MiniDIN female connector
Computer:
- Keyboard 6-pin MiniDIN female connector
- VGA monitor HD-15-F male connector
- Mouse 6-pin MiniDIN female connector
max. distance amplifier - computer: maximal 80 m
max. distance between amplifier and PC: 2 m Power supply 12,5 V=/850 mA (power supply unit is included) |
Verst.Mon/80m VGA-Monitor-Amplifier up to 80m |
 Integration between computers and control position.-
Transmission from VGA signals up to 80m:
1024x768 (75Hz): up to 80m
1600x1280 (75Hz): up to 50m - connections at both sides HD-15-F.
- Power pack in the scope of supply.
- Dimensions (BxTxH): 43x75x24 mm
Necessary VGA cable is not contained in the scope of supply.. |
Verst.Tas/150m keyboard-, Mouse-Amplifier up to 150m |
 Integration between computers and control position- amplifier for keyboard/mouse, integrated into one device
- Interfaces:
a) Input on keyboard:
keyboard: 5-pol DIN and 6-pol. mini-DIN,
female
a) output to computer:
keyboard: 5-pol DIN and 6-pol. mini-DIN,
female - distance of keyboard max. 36m
- distance of the amplifier
max. 27m
- power supply included
- without cables (2 PS/2 cables necessary)
|
USB converter / adapter PS2 - USB |
 To make it possible to connect our industrial keyboards optionally to USB ports, a PS/2 to USB - converter for the connection between the keyboard and the computer has been tested and released. This allows you to decide individually which port of the computer you wish to use. Moreover, only 1 USB port is used instead
of 2 PS/2 ports. The PS/2 to USB-converter has two MiniDIN6 female connectors for keyboard and mouse substitute system as input terminals, and one USB-connector to the computer as output terminal; it doesn’t require a separate power supply and works under Windows versions 98 and higher.
Data sheet as PDF-file
|
AdaptUSB-RS232 : Adapter USB – RS232 (transformer cable) |
To make it possible to connect an USB port directly to a RS232-interface, we can provide you with the respective transformer cable.
 It can be used without separate power supply and it supports all current Windows versions. Specifications: - USB 1.1 interface
- RS232-interface (9-pin Sub-D)
- data transmission rate 1Mbps
- supports hardware handshake
- drivers for Windows 98, 2000, ME or XP
- cable length 1,8m
|
